Independent vehicle diagnostics reference9,578 definition records · 11,412 unique codes · 68,396 vehicle evidence records
Search

Diagnostic trouble code

C2195

C2195 Fault Code

Home/ Fault codes/ C2195

Car Codes diagnostic trouble code

C2195Diagnostic priority

…nd/or B108A:9E (stuck on). The ignition mode light emitting diode (LED) indicator may also flash quickly. This condition may be caused by loose wiring terminal crimps on connector C2195 at the push button ignition switch. Examine Pin 1 (CPK34/Gn) first, since it is the only pin with the smallest (26 gauge) wire. To correct this condition, repair terminal crimps per Wiring Diagram (WD) Cell 5. If no wiring terminal faults are found, refer to…

01

Code interpretation

What C2195 means

This code indicates Vehicle fault code with verified manufacturer evidence Its precise meaning depends on the reporting control module, complete failure-type suffix, model year, powertrain and software level.

!

Driver experience

Symptoms you may notice

A stored diagnostic trouble code or a related system warning.

?

Test, do not guess

Possible causes

The precise cause depends on the reporting module, vehicle specification, circuit condition and software level.

Evidence-led checks

Recommended diagnostic route

Save the complete scan and confirm the code against model-specific technical information before testing.

  1. Capture the evidenceSave the complete all-module scan, code suffixes and freeze-frame data.
  2. Prove the basicsTest battery condition, system voltage, power and grounds.
  3. Identify the reporterConfirm the module that logged the code and check circuit integrity.
  4. Compare live dataReview commanded and actual values under the conditions that set the code.
  5. Test before replacingUse model-specific wiring diagrams, pin tests and technical information.
  6. Verify the repairClear the code only after recording evidence, then confirm it does not return.

Vehicle fitment

Vehicle applicability

Ford Explorer

Before clearing

Can the code be cleared?

Clearing a code without fixing the cause removes useful evidence and may only switch the warning off temporarily. Save the full scan first; a permanent or repeatedly returning code needs testing.

A DTC is evidence, not a parts order.

Confirm the suffix, reporting module, model, year, engine and live data before replacing a component.

Verified public evidence

Manufacturer and model coverage

4 public manufacturer records match this search. These records support applicability research but do not replace VIN-specific workshop information.

C2195Ford Explorer
EXPLORER · 2020 · Multiple/unspecified

…nd/or B108A:9E (stuck on). The ignition mode light emitting diode (LED) indicator may also flash quickly. This condition may be caused by loose wiring terminal crimps on connector C2195 at…

Source
C2195Ford Explorer
EXPLORER · 2021 · Multiple/unspecified

…nd/or B108A:9E (stuck on). The ignition mode light emitting diode (LED) indicator may also flash quickly. This condition may be caused by loose wiring terminal crimps on connector C2195 at…

Source
C2195Ford Explorer
EXPLORER · 2022 · Multiple/unspecified

…nd/or B108A:9E (stuck on). The ignition mode light emitting diode (LED) indicator may also flash quickly. This condition may be caused by loose wiring terminal crimps on connector C2195 at…

Source
C2195Ford Explorer
EXPLORER · 2023 · Multiple/unspecified

…nd/or B108A:9E (stuck on). The ignition mode light emitting diode (LED) indicator may also flash quickly. This condition may be caused by loose wiring terminal crimps on connector C2195 at…

Source