P208C Fault Code – Reductant Pump A Control Circuit Low

Car Codes diagnostic trouble code

P208CDiagnostic priority

Reductant Pump A Control Circuit LowDiagnostic contextPotentially applicable to OBD-II-compliant vehicles; confirm against vehicle VIN, model year and module.Vehicle applicabilityApplicability varies by vehicle, powertrain, model year and control module.

Code interpretation

What P208C means

This code indicates Reductant Pump A Control Circuit Low Its precise meaning depends on the reporting control module, complete failure-type suffix, model year, powertrain and software level.

Driver experience

Symptoms you may notice

A stored diagnostic trouble code or related system symptom.

Test, do not guess

Possible causes

Confirm the reporting module, circuit condition, power supply, wiring, component performance and software status.

Evidence-led checks

Recommended diagnostic route

Save the complete scan, confirm the full code and reporting module, then test using model-specific multi-brand technical information.

Capture the evidenceSave the complete all-module scan, code suffixes and freeze-frame data.
Prove the basicsTest battery condition, system voltage, power and grounds.
Identify the reporterConfirm the module that logged the code and check circuit integrity.
Compare live dataReview commanded and actual values under the conditions that set the code.
Test before replacingUse model-specific wiring diagrams, pin tests and technical information.
Verify the repairClear the code only after recording evidence, then confirm it does not return.

Vehicle fitment

Vehicle applicability

Volkswagen Touareg

Before clearing

Can the code be cleared?

Clearing a code without fixing the cause removes useful evidence and may only switch the warning off temporarily. Save the full scan first; a permanent or repeatedly returning code needs testing.

A DTC is evidence, not a parts order.

Confirm the suffix, reporting module, model, year, engine and live data before replacing a component.

Verified public evidence

Manufacturer and model coverage

8 public manufacturer records match this search. These records support applicability research but do not replace VIN-specific workshop information.

P208CLand Rover Discovery
DISCOVERY · 2017 · Powertrain

…Restarts message in XXX miles' message may be displayed on the Instrument Cluster (IC). Upon further diagnosis, the technician may find DTC (Diagnostic Trouble Code) P208A-13 and P208C-11 stored in…

Source

P208CLand Rover Discovery
DISCOVERY · 2017 · Powertrain

Source

P208CLand Rover Range Rover
RANGE ROVER · 2017 · Powertrain

Source

P208CLand Rover Range Rover
RANGE ROVER · 2017 · Powertrain

Source

P208CVolkswagen Touareg
TOUAREG · 2011 · Powertrain

…nding issue. The Diagnostic strategy of ECM software is too sensitive, causing the MIL to illuminate and the following faults to set in the ECM/EDC memory during system checks: ?…

Source

P208CVolkswagen Touareg
TOUAREG · 2012 · Powertrain

…nding issue. The Diagnostic strategy of ECM software is too sensitive, causing the MIL to illuminate and the following faults to set in the ECM/EDC memory during system checks: ?…

Source

P208CVolkswagen Touareg
TOUAREG · 2011 · Powertrain

…nding issue. The Diagnostic strategy of ECM software is too sensitive, causing the MIL to illuminate and the following faults to set in the ECM/EDC memory during system checks: ?…

Source

P208CVolkswagen Touareg
TOUAREG · 2012 · Powertrain

…nding issue. The Diagnostic strategy of ECM software is too sensitive, causing the MIL to illuminate and the following faults to set in the ECM/EDC memory during system checks: ?…

Source